DIY Star Wars Rebels Chopper Trick-or-Treat Bag

As I mentioned earlier this week, I really like Chopper from Star Wars Rebels. I made a pair of Chopper shoes, and I had to craft a Chopper trick-or-treat bag. The hardest part of making this bag was cutting out all of Chopper's droid bits. The rest was cake. You could simplify the template more to make it easier, but if you can wield a X-acto knife (not my strong suit), you'll be fine.

Supplies you'll need:
- Chopper template printed on card stock, 6 inches wide (template below)
- Black tote bag
- Stiffened orange felt
- Fabric glue
- X-acto knife and cutting mat
- Pen

Print Chopper onto a piece of card stock. If you have to print him on regular paper, cut him out with a X-acto knife and trace the template onto thicker paper. Then, trace that onto a piece of stiffened orange felt. Cut Chopper from felt with a X-acto knife.

Mark where you want to place Chopper on the front of the bag, spread a thin layer of fabric glue on the back of Chopper, and press the orange felt onto the black bag. I put a heavy book on top of Chopper until the glue dried.

Take Chopper out with you when yo go trick-or-treating, just don't channel any of his grumpiness when you ask for candy!

Click to enlarge and download.

See more Star Wars trick-or-treat bag how-tos at the StarWars.com blog.